Pampas

Owner: K.F. Douch

Area: Canada


New boat, steam plant fitted by owner 1989-1990. Approx miles steamed 1998 - 30; 1999 - 20. Engine formerly in ALENA.


Panatela

Status: Sold

Owner: Sold

Website: http://www.panatela.nl/index%20gb.htm

Area: Netherlands


First steaming in 2010


Paper Moon

Owner: The World of Country Life

Area: UK


Former Royal Navy workboat. Restored and steam plant fitted by previous owner David Payne 1989-91. First steamed July 1991. Acquired 1996 at Great Dorset Steam Fair Auction, on static display. Boiler formerly in GAZELLE 1960’s; LADY SOPHINA 1970 - 76; SALAMANDER 1977 - 81; SERINA 1982 - 85; THAMES MIST 1985 - 89.


Patience

Owner: J.G. Hughes

Area: UK-West Midlands



Patience

Status: Laid Up - resting

Owner: Pauline Camping

Area: UK



Pauline

Owner: Hubert Paulus

Area: Germany



Pauline

Owner: J. Daley

Area: USA



Peace

Owner: Mark de Barr

Area: UK-South West


Plant from SL Jenny Wren.


Pegasus

Owner: M.; I. O’Crowley; Rees

Area: UK-West Midlands


New launch designed, built and machinery installed by first owner, Maurice Popplestone on Union Canal. Approx miles steamed 1996 to 98 - 100 each; 1999 - 30. Acquired Feb. 2000 by Geoff Swaine and based on the Montgomery canal. Aquired 2007 by Matthew O’Crowley and Ian Rees. Based at Cowes, IoW.


PEGGY

Status: Steaming

Owner: Hermann Metz

Area: UK-Cambridgeshire



Pendlebury

Owner: Unknown

Area: UK-Midlands


New boat built to owners requirements, steam plant fitted 1993. First steamed 1997.


Penelope

Owner: R. Muller

Area: Australia


Former motor fishing boat, rescued by owner from under some gum trees in 1993, restored by Jim Golly. Steam plant installed by owner.


Penelope

Owner: R.L. Stant

Area: UK-Midlands


New boat, plant installed by owner 1986, first steamed March 1987, and steamed most years since. Total weight on 4 wheel trailer 30cwt.


Persephone

Status: Sold

Area: Sweden


New launch, built and fitted out and steam plant installed by owner 1986. First steamed 1988. Sold to unknown buyer in Sweden


Persephone

Status: Active use

Owner: Wash & Teresa Kohnke

Area: USA



Perseverance

Owner: The Boat Museum Trust

Area: UK-West Midlands


Supplied new to Grand Union Canal Co. Ltd. as their dredger ‘No.14’, later British Waterways Board, 1967 - 1974 owned by Kennet &Avon Canal Trust. 1974-1993 Surrey & Hampshire Canal Society. Acquired October 1993, for restoration 2000-01. Boiler formerly used at Luton laundry.


Perseverance

Owner: G.B. Simpson

Area: UK-South West


Hull, boiler and original burner designed by first owner Hugh Cawdon as a trailable boat following the SBA Seminar on that subject 1976. Launched 1989, hence name! First steamed c 1991, steamed most years since. Acquired 1999. Pressure jet burners and positive engine oiling system fitted by current owners in 2001. Over 110 hours in steam in 2002 and also in 2003.


Persistance

Status: Under Construction

Owner: Steven J. Harcourt, Wesley J. Harcourt

Website: https://www.youtube.com/user/bilgerat671

Area: USA


Hull purchased in Washington in 2004. Extensively repaired, replacing plates, and adding superstructure. Engine purchased in Sudbury, Ontario in 2006 and trucked back to California. Added condensate and feed pumps made from weldament to replace missing originals. Replaced cast iron LP piston with hollow aluminium one weighing 20lbs less! Working on replacing Slide Valves with Balanced Slide Valves. Launch date in the Sacramento River Delta August 23rd, 2017. Steamed over 3,000 miles as of January 2021.


Pet

Owner: S. Lucas

Area: USA



Petagin

Status: Steaming

Owner: Malcolm Burge

Area: UK-Midlands


Built as a motor boat for E.M.Corbett of Palace Mansions, S.W.1 London, by W.R Kerrison of Oulton Broad and fitted with a 1923 Brooke type 14/23 three cylinder petrol engine no.4090 (this engine owned by Richard Bartrop). In 1954 after E.M. Corbett died, it was left to the Royal Norfolk & Suffolk Yacht Club, as a rescue boat but deemed unsuitable for their needs. From1957 owned on Broads and Medway by Sydney Mobbs. 1963 R William Cooper Lt.Cdr.,R.N. 1970 London & Rochester Trading Co - Machin Knight & Co -Nick Knight. 1971 David Bartrop, Long Eaton, Nottingham. 1982 Joint ownership with Richard Bartrop, restored and plant fitted by owners in1983 with steam plant ex KITTEN CAT (part exchanged with GE Bellis engine no.727 with Nick Knight). First steamed 24 Oct 1983, and steamed each year since. Registered ON 162971 with original builders certificate existing After over 50 years ownership, Malcolm Burge of Alvecote Marina ,Tamworth has purchased her in September 2023


Petunia

Owner: P.L. Frost

Area: UK-North


New launch built to owners design and specification. Ref: Funnel No 73-75. First steamed 1993. Steamed every year since. Boiler formerly in GRACE 1985-88.


Phaeton

Owner: Monkhouse Family

Area: UK-East Anglia


New hull, fitted out and plant installed by owners 1982-3, first steamed 11 June 1983. In 2004, boiler turned 90 degrees to provide better access for firing. Ref: Funnel 43. (SSR 05656). Steamed every year since. Engine formerly in SAUMAREZ 1973-90.


Phoebe

Owner: A. Griggs

Area: UK


Built and steam plant fitted by first owner Alan Kitson, S. Devon, first steamed 22 August 1985. Acquired 1992 by BE.Ellam, steamed about 150 miles during 1992. Aquired 2002 by J.Boarder & P.Kerry Aquired 2007 by Andy Griggs.


Phoebe Snow

Owner: D. E. Fenstermacher, Sr.

Website: http://www.slphoebesnow.com

Area: USA


Phoebe Snow is our second boat, and built to replace our 20' Rose hull Adelaide which served us well for over 15 years. We were in need of a larger boat to accomodate our expanding family, which lead us to the purchase of an Elliott Bay hull. In 2009 we were able to obtain a bare, unfinished, new / old stock hull. This hull was originally built as E.B. hull #14 in 1987. It had been sold to it's original owner who had an untimely death before ever being fitted out, registered or launched, it sat in his shop for 22 years! With the sale of Adelaide, my son and I started the long process of fitting out the new boat. Still a work in progress, we launched Phoebe Snow in July, 2013.


Phoenix

Owner: R.J. Burleigh

Area: USA


New boat built over a 23 year period, owner wonders if this is a record? Steam plant installed by owner. First steamed Dec 1996. Approx miles steamed; 1996 - 50; 1997 - 160; 1998 - 90; 1999 - 50.


Phoenix

Owner: Unknown

Area: UK


Designed and built for first owner Norman Terry. 1983 donated to Droitwich Canal Trust. 1997-1998 fully restored by owners, The Phoenix Club, fresh boiler fitted. Sold 2004 Refs: LSP Sept-Oct 1968, Funnel 97 (1998).


Phoenix

Owner: J. Trevelyan

Area: UK-Wales


5 year project begun in 1996. For completion August 2000.


Phoenix

Status: Steaming

Owner: Five owners....

Website: http://www.stoomboot-phoenix.nl

Area: Netherlands west region near Leiden


In 2009 the Phoenix was assembled from scratch. In 2010 we made our maiden voyage and since then every summer, trips are made around the lakes in the western part of Holland near Leiden. In 2014 we made a round trip to Utrecht and steamed for eight consecutive days without any problems, a distance of 200 km. Every winter we make technical improvements: see our website: www.stoomboot-phoenix.nl for all our activities.


Picnic

Status: Active use - resting

Owner: John A. Frampton

Website: http://Johnaframpton53@gmail.com

Area: UK-South West


Steam plant removed from Bucephalus Steam Bicycle, it was originally designed to power a Steam Canoe. Mounted on a lift-in bearer, and fitted with a new gas firing system. New piping was made up to suit boat installation, and improvements to fittings were made. Construction was started in April 2020, flotation testing, July 2020, and construction completed in April 2021. Currently frequently in use with outboard motor as boiler is not yet certified, although it is steam able.


Pierrette

Owner: W. Rose

Area: UK-Thames


Owned Mr Brunton, Bourne End 1895, 1930’s tripping boat at Marlow. Sunk at Ashton Ferry 1946, salvaged by Thames Conservancy, acquired by J.B. Hickey, hull replated by T. Taylor & Son, Staines, 1950’s. Acquired for owner’s collection 1965 from R. Lucas, Norfolk, re-fitted 1969-1994.


Pioneer

Status: Steaming

Owner: Dave Biss

Area: UK-South West


Former fishing boat hull acquired June 1988; reconditioned and steam plant fitted by owners August 1989. First steamed at Royal Dart Regatta 1989. Recommissioned for 2000 and used several times. Hull & engine sold to Dave Biss (boiler removed to power a brewery!). New boiler fitted & boat recommissioned 2019.


Pipedream

Owner: J. & J. Gibbs

Area: UK-Chiltern


Prototype of Limited Edition Steam Launches. Carvel plug based on enlarged FEEBLE design of 1943 by Weston Farmer. First launched 1992. British Waterways reg no: 100222.


Pisces

Owner: R.J. Partis

Area: UK


Hull acquired by owner May 1981, plant fitted Aug. First steamed 12 Sept 1981. Laid up since 1997 season. 1981-84 fitted with VFT built by owner 1980-81


Placide

Owner: A. Green

Area: UK-Midlands



Pluto

Owner: F.W. Busch

Area: Germany


New boat built to owner’s specification, steam plant fitted by J. Alex Ritchie and Peter Frost. Additional boatbuilding by Bob Fenton. First steamed 1997. (V belt drive Bosch alternator, 30 amps at 1200 rpm)


Pluto

Status: Active use

Owner: Friedrich W. Busch

Area: Germany


Engine, auxiliary Worthington fp, funnel, rudder gear with ebony handle and most boiler and deck fittings ex LIFU tender to Lord Brassey´s schooner "Sunbeam". Plant in "Mary Anne", then in "Bruin II" ( John Murch, J. Alex Ritchie). New hull designed by John King as an as close as possible replica of a LIFU yacht tender using LIFU archive material. Missing fittings reproduced to LIFU specifications.


PocoLoco

Status: Steaming

Owner: Gord Bruce

Area: Canada


started by buying the lathe in 2004, engine castings and boat plans in 2005. Engine complete and running on air 2008. Keel laid 2006, complete hull flipped 2012. Boat/engine/boiler delivered to Virginia autumn 2014. Picked up spring 2017, launched August 2017 (minor leaks. now repaired)/ First and only 3 trips very successful. All work was done only during summer months, at cottage, between bouts of entertaining family/guests.


Pod's Puffin

Owner: A.T. Hobbins

Area: UK-Midlands


New launch built entirely by first owner Arthur Podmore. First steamed 1985, and each year since, on River Dee. Acquired Oct 1999.


Polly

Owner: J. Cocklin

Area: UK-Solent


New boat built and steam plant fitted by first owner Bill Hall. First steamed 1989 and steamed each year since., steamed about 200 miles during 1992, and 300 miles during 1993. Acquired 1999.


Pollywog

Status: Fettling needed - Awaiting refit

Owner: Stewart Chorley

Area: UK-South West


Former motor boat hull used around Portsmouth Harbour area, acquired 1979, steam plant built and fitted by previous owner 1978 to 1984. Hull design and propeller arrangement almost identical with a 1930’s design called Pollywog by a US naval architect William Deed. Steamed regularly. Ref: From my Old Boat Shop, page 256. Purchased by current owner in September 2017 and currently undergoing full general restoration as she was unused for many years. Hope to re-launch in late 2021.


Portwey

Owner: The Maritime Trust

Website: http://www.stportwey.co.uk/

Area: UK-East Anglia


Built for Portland & Weymouth Coaling Co. Ltd., launched 10-8-1927. Later C.H. Collins, Weymouth. 1952 to Falmouth Docks & Engineering Co. Ltd. c1972 to R.H. Dobson, Stoke Gabriel, for preservation. Acquired by M.T.1982. Displayed at St Katherine’s Dock 1980-86, now kept at West India Dock and steamed regularly by the Portway Steaming Committee (Contact Barrie Sanderson, Phone: 01268-769583). Ref: Funnel 102


Poseidon

Status: Undergoing renovation

Owner: Graham Clark

Area: UK-East Anglia


Sold by David Flockhart to current owner July 2022


President

Status: Steaming

Owner: Black Country Living Museum

Website: http://www.nb-president.org.uk/

Area: UK-Midlands


Built for FMC’s own fleet. Originally had tandem comp. engine. Converted with Bolinder motor 1925. 1973 derelict. Restored by M.E.Braine, Walsall; present plant 1977; acquired ’82. On display at Dudley. 1992 steamed 1006 miles during 92 days. Steamed regularly around canal system. Ref: Classic Boat, April 1992 Previously fitted with 4½" + 4½" x 6" twin with sv and SLRG. Cast hammer frames, bored trunk guides, non-cond. 100 rpm (FUNNEL 14) Maintained and operated for The Black Country Living Museum by Friends of President. Registered on the National Historic Fleet at National historic Fleet. Represented Staffordshire in the Queen's Diamond Jubilee Pagent 2012


Pricilla

Owner: M. Morris

Area: UK-West Midlands


Second hand hull acquired and fitted out and steam plant installed by previous owner Robert van Es, Kingsbridge, first steamed 1995. Acquired by Mike Morris 1998. Approx miles steamed 1997 - 60; 1998 - 40; 1999 - 120. Ref Funnel 93.


Progress

Owner: J. Bullock

Area: UK-Thames


Originally a Broads cruiser with motor, named MYRTLE,acquired in 1930’s by Mr Banham, Cambridge and used as a hire cruiser. Acquired 1971 by William Corbett and steam plant installed 1974. Acquired by Wigan Education Dept. Jan 1984, renamed, and on display at Wigan Pier. Owned by Nigel Heath late 1996 to early 1998 when acquired by Julius Bullock. Engine previously in PARAFFINALIA.


Prometheus

Status: Active use

Owner: Ewald Hackenbruch

Area: Germany


New boat fitted out by Horst Wagner and machinery installed by Hans Götz. Ref: Funnel 97 for photos of machinery.


Pterion

Owner: J.Q. Lees

Area: UK-Solent


New launch built to first owner Tom Hill’s specification. First steamed 24th April 1992. Steamed 110 miles during 1992. Acquired 1997, steamed each year since.


Puddle Duck

Owner: S. Drake

Area: UK-Thames


New boat built, fitted out and steam plant fitted by owners, first steamed 1989. Steamed each year since.


Puff

Status: Laid Up - Awaiting refit

Owner: L.D. Cremer Evans

Area: UK-North East


Designed, built and fitted by previous owners J.R. & D.J. Harding on lines of a small canal tug. Acquired 1976 and re styled. Laid up during 1992. Re-commissioned 1998. Laid up again, waiting for chance to get her going again.


Puff o' Smoke

Owner: C.; J. Edmonds; Vaneems

Area: UK


New boat, hull fitted out and plant installed by first owner Allan Beach. First steamed 1985. Steamed each year since, 300-400 miles per year. Acquired June 1998.


Puffer 2

Owner: A.D. Griffiths

Area: UK-Wales


Acquired 1987.


Puffin

Status: Dismantled

Owner: R. & N. Powell

Area: UK-South East


Hull acquired, restored and plant fitted by Ken Slater, Shaldon 1957. 1968 owned by J.A. Crabtree. Acquired June 1975 by H.Graham Powell, cabin removed and re-designed as open cutter 1987 on River Avon at Bredon. Steamed each year since 1975, total c. 6000 miles. Dismantled in 2006, and hull scrapped. Machinery moved to new clinker built Puffin.


Puffin

Status: Active use

Owner: R. & N. Powell

Area: UK-South West


Machinery transferred from old SL PUFFIN to new hull by owners. Relaunched at Beale Park Wooden Boat Show 2007. New engine built by Sam Wilkinson installed in 2019.


Puffin (HSL)

Owner: J. Carstairs

Website: http://www.hsl256.co.uk

Area: UK-Wales


Built for Admiralty as HSL 256. Later owned by J. Hay, Lerwick, 1952 B.F. Marriage. Acquired R.W. Partis in 1971 and cruised extensively. Acquired April 1985 by A.G. Gurner. (ref. FUNNEL 7 and 13). Not steamed 1985-1992. Boiler formerly in yacht KATHLYN. Being renovated 2006.


Puffing Billy

Status: Fettling needed - Long term storage

Owner: Bill Bertram

Area: UK-South West


Bought in 2006, been stored since 2007, trailer custom made with ability to lower boat into the water with 2nd trailer carried piggy-back


Pugnacious

Owner: J. Alves

Area: USA


New launch fitted out by moulder and owner, steam plant installed by owner 1991. New single engine to be fitted 2000 hopefully!


Pugwash

Owner: C. Balls

Area: UK-East Anglia


Built in two halves, bolted together, or can be used separately. First steamed 1992.


Punch & Judy

Owner: R.D. Cadogan

Area: UK-Solent


New boat, designed and built by owners. Steam plant fitted 1994, at first with a Lune Valley type boiler. First steamed July 1995. Approx miles steamed 1997-150; 1998 - 228.


Pussy Willow

Owner: A. Hodgson-Jones

Area: UK-Midlands


New launch, designed, fitted out, and steam plant installed by owner Kester Shave 1993-1994, work progressing slowly. For completion 2001. Boiler formerly in GLENROSA 1982-88. New owner Alister Hodgson-Jones April 2002.